Command Summary
* find cursor under word
STARTING vi
vi filename edit a file named "filename"
vi newfile create a new file named "newfile"
ENTERING TEXT
i insert text left of cursor
a append text right of cursor
MOVING THE CURSOR
h left one space
j down one line
k up one line
l right one space
BASIC EDITING
:line1,line2d delete between two
x delete character
nx delete n characters
X delete character before cursor
dw delete word
ndw delete n words
dd delete line
ndd delete n lines
D delete characters from cursor to end of line
r replace character under cursor
cw replace a word
ncw replace n words
C change text from cursor to end of line
o insert blank line below cursor
(ready for insertion)
O insert blank line above cursor
(ready for insertion)
J join succeeding line to current cursor line
nJ join n succeeding lines to current cursor line
u undo last change
U restore current line
MOVING AROUND IN A FILE
w forward word by word
b backward word by word
$ to end of line
0 (zero) to beginning of line
H to top line of screen
M to middle line of screen
L to last line of screen
G to last line of file
1G to first line of file
<Control>f scroll forward one screen
<Control>b scroll backward one screen
<Control>d scroll down one-half screen
<Control>u scroll up one-half screen
n repeat last search in same direction
N repeat last search in opposite direction
CLOSING AND SAVING A FILE
ZZ save file and then quit
:w save file
:q! discard changes and quit file
:0
Shift G
ggVG select all
"+y
"+gP
3yl
yE
yiw yank inner word (copy word under cursor, say "first").
viwp select "second", then replace it with "first".
viw"0p select "third", then replace it with "first".
Copy a line and paste it over other lines:
yy yank current line (say "first line").
Yp dublicate line
Vp select "second line", then replace it with "first line".
V"0p select "third line", then replace it with "first line".
TAB
vim -p first.txt second.txtd
gt go to next tab
gT go to previous tab
{i}gt go to tab in position i
Ctrl-PgDn go to next tab
Ctrl-PgUp go to previous tab
search
%s/search/replace/gc
undo/redo
u undo
Ctrl+r redo
. repeat
navigation
gg Goto start of file
G Goto end of file
:54 Goto line 54
80| Goto column 80
Ctrl+g Show file info including your position in the file
ga Show character info g8 shows UTF8 encoding
Ctrl+e scroll up Ctrl+x needed first for insert mode
Ctrl+y scroll down Ctrl+x needed first for insert mode
zt scroll current line to top of window
w Goto next word Note Ctrl+{right} in newer vims (which work also in insert mode)
b Goto previous word Note Ctrl+{left} in newer vims
[{ Goto previous { of current scope
% Goto matching #if #else,{},(),[],/* */ must be one on line
zi toggle folds on/off
How to copy yanked text to VI command prompt : v (visual mode) select copy area with -> (left arrow) y (copy) Shift ins (paste prompt)
Save as :w abc.txt
:21,32y yanked 11 lines
higlight cursor line
:color desert
:set cursorline
:hi CursorLine term=bold cterm=bold guibg=Grey40
"*y copy a line in a file
"*p paste copied line an other file
Listing
To see a list of current buffers, I use:
:ls
Opening
To open a new file, I use
:e ../myFile.pl
with enhanced tab completion (put set wildmenu in your .vimrc).
Note: you can also use :find which will search a set of paths for you, but you need to customize those paths first.
Switching
To switch between all open files, I use
:b myfile
with enhanced tab completion (still set wildmenu).
Note: :b# choses the last visited file, so you can use it to switch quickly between two files.
Global command
:g/one\|two/ : list lines containing "one" or "two"
:g/^\s*$/d : delete all blank lines
:g/green/d : delete all lines containing "green"
:v/green/d : delete all lines not containing "green"
:g/one/,/two/d : not line based
:v/./.,/./-1join : compress empty lines
Multiple files
:wn : write file and move to next (SUPER)
:bd : remove file from buffer list (SUPER)
:sav php.html : Save current file as php.html and "move" to php.html
:sp fred.txt : open fred.txt into a split
:e! : return to unmodified file
:w /some/path/%:r : save file in another directory, but with the same name
:e # : edit alternative file
:args : display argument list
:n : next file in argument list
:prev : previous file in argument list
:rew : rewind to first file in argument list
:ls : display buffer list
:bn : next buffer
:bp : previous buffer
:brew : rewind to first buffer in buffer list
:tabe : open new tab page (Ctrl-PgUp, Ctrl-PgDown for next/previous tab)
:tabm n : move tab to position n (0=leftmost position)
guu : lowercase line
gUU : uppercase line
Where grep came from (RE being Regular Expression):
:g/RE/p
Delete lines 10 to 20 inclusive:
:10,20d
or with marks a and b:
:'a,'bd
Delete lines that contain pattern:
:g/pattern/d
Delete all empty lines:
:g/^$/d
Delete lines in range that contain pattern:
:20,30/pattern/d
or with marks a and b:
:'a,'b/pattern/d
Substitute all lines for first occurance of pattern:
:%s/pattern/new/
:1,$s/pattern/new/
Substitute all lines for pattern globally (more than once on the line):
:%s/pattern/new/g
:1,$s/pattern/new/g
Find all lines containing pattern and then append -new to the end of each line:
:%s/\(.*pattern.*\)/\1-new/g
Substitute range:
:20,30s/pattern/new/g
with marks a and b:
:'a,'bs/pattern/new/g
Swap two patterns on a line:
:s/\(pattern1\)\(pattern2\)/\2\1/
Capitalize the first lowercase character on a line:
:s/\([a-z]\)/\u\1/
more concisely:
:s/[a-z]/\u&/
Capitalize all lowercase characters on a line:
:s/\([a-z]\)/\u\1/g
more concisely:
:s/[a-z]/\u&/g
Capitalize all characters on a line:
:s/\(.*\)/\U\1\E/
Capitalize the first character of all words on a line:
:s/\<[a-z]/\u&/g
Uncapitalize the first character of all words on a line:
:s/\<[A-Z]/\l&/g
Change case of character under cursor:
~
Change case of all characters on line:
g~~
Change case of remaining word from cursor:
g~w
Increment the number under the cursor:
<Ctrl-A>
Decrement the number under the cursor:
<Ctrl-X>
redraw:
<Ctrl-L>
Turn on line numbering:
:set nu
Turn it off:
:set nonu
Number lines (filter the file through a unix command and replace with output):
:%!cat -n
Sort lines:
:%!sort
Sort on column #69:
:sort /.*\%69v/
Sort and uniq:
:%!sort -u
Read output of command into buffer:
:r !ls -l
Refresh file from version on disk:
:e!
Open a new window:
<Ctrl-W>n
Open a new window with the same file (split):
<Ctrl-W>s
Split window vertically:
<Ctrl-W>v
Close current window:
<Ctrl-W>c
:q
Make current window the only window:
<Ctrl-W>o
Cycle to next window:
<Ctrl-W>w
Move to window below current window:
<Ctrl-W>j
Move to window above current window:
<Ctrl-W>k
Move to window left of current window:
<Ctrl-W>h
Move to window right of current window:
<Ctrl-W>l
Set textwidth for automatic line-wrapping as you type:
:set textwidth=80
Turn on syntax highlighting
:syn on
Turn it off:
:syn off
Force the filetype for syntax highlighting:
:set filetype=python
:set filetype=c
:set filetype=php
Use lighter coloring scheme for a dark background:
:set background=dark
Htmlize a file using the current syntax highlighting:
:so $VIMRUNTIME/syntax/2html.vim
Or, htmlize from a command prompt:
in 2html.sh put:
#!/bin/sh
vim -n -c ':so $VIMRUNTIME/syntax/2html.vim' -c ':wqa' $1 > /dev/null 2> /dev/null
Now just run: shell> 2html.sh foo.py
* find cursor under word
STARTING vi
vi filename edit a file named "filename"
vi newfile create a new file named "newfile"
ENTERING TEXT
i insert text left of cursor
a append text right of cursor
MOVING THE CURSOR
h left one space
j down one line
k up one line
l right one space
BASIC EDITING
:line1,line2d delete between two
x delete character
nx delete n characters
X delete character before cursor
dw delete word
ndw delete n words
dd delete line
ndd delete n lines
D delete characters from cursor to end of line
r replace character under cursor
cw replace a word
ncw replace n words
C change text from cursor to end of line
o insert blank line below cursor
(ready for insertion)
O insert blank line above cursor
(ready for insertion)
J join succeeding line to current cursor line
nJ join n succeeding lines to current cursor line
u undo last change
U restore current line
MOVING AROUND IN A FILE
w forward word by word
b backward word by word
$ to end of line
0 (zero) to beginning of line
H to top line of screen
M to middle line of screen
L to last line of screen
G to last line of file
1G to first line of file
<Control>f scroll forward one screen
<Control>b scroll backward one screen
<Control>d scroll down one-half screen
<Control>u scroll up one-half screen
n repeat last search in same direction
N repeat last search in opposite direction
CLOSING AND SAVING A FILE
ZZ save file and then quit
:w save file
:q! discard changes and quit file
:0
Shift G
ggVG select all
"+y
"+gP
3yl
yE
yiw yank inner word (copy word under cursor, say "first").
viwp select "second", then replace it with "first".
viw"0p select "third", then replace it with "first".
Copy a line and paste it over other lines:
yy yank current line (say "first line").
Yp dublicate line
Vp select "second line", then replace it with "first line".
V"0p select "third line", then replace it with "first line".
TAB
vim -p first.txt second.txtd
gt go to next tab
gT go to previous tab
{i}gt go to tab in position i
Ctrl-PgDn go to next tab
Ctrl-PgUp go to previous tab
search
%s/search/replace/gc
undo/redo
u undo
Ctrl+r redo
. repeat
navigation
gg Goto start of file
G Goto end of file
:54 Goto line 54
80| Goto column 80
Ctrl+g Show file info including your position in the file
ga Show character info g8 shows UTF8 encoding
Ctrl+e scroll up Ctrl+x needed first for insert mode
Ctrl+y scroll down Ctrl+x needed first for insert mode
zt scroll current line to top of window
w Goto next word Note Ctrl+{right} in newer vims (which work also in insert mode)
b Goto previous word Note Ctrl+{left} in newer vims
[{ Goto previous { of current scope
% Goto matching #if #else,{},(),[],/* */ must be one on line
zi toggle folds on/off
How to copy yanked text to VI command prompt : v (visual mode) select copy area with -> (left arrow) y (copy) Shift ins (paste prompt)
Save as :w abc.txt
:21,32y yanked 11 lines
higlight cursor line
:color desert
:set cursorline
:hi CursorLine term=bold cterm=bold guibg=Grey40
"*y copy a line in a file
"*p paste copied line an other file
Listing
To see a list of current buffers, I use:
:ls
Opening
To open a new file, I use
:e ../myFile.pl
with enhanced tab completion (put set wildmenu in your .vimrc).
Note: you can also use :find which will search a set of paths for you, but you need to customize those paths first.
Switching
To switch between all open files, I use
:b myfile
with enhanced tab completion (still set wildmenu).
Note: :b# choses the last visited file, so you can use it to switch quickly between two files.
Global command
:g/one\|two/ : list lines containing "one" or "two"
:g/^\s*$/d : delete all blank lines
:g/green/d : delete all lines containing "green"
:v/green/d : delete all lines not containing "green"
:g/one/,/two/d : not line based
:v/./.,/./-1join : compress empty lines
Multiple files
:wn : write file and move to next (SUPER)
:bd : remove file from buffer list (SUPER)
:sav php.html : Save current file as php.html and "move" to php.html
:sp fred.txt : open fred.txt into a split
:e! : return to unmodified file
:w /some/path/%:r : save file in another directory, but with the same name
:e # : edit alternative file
:args : display argument list
:n : next file in argument list
:prev : previous file in argument list
:rew : rewind to first file in argument list
:ls : display buffer list
:bn : next buffer
:bp : previous buffer
:brew : rewind to first buffer in buffer list
:tabe : open new tab page (Ctrl-PgUp, Ctrl-PgDown for next/previous tab)
:tabm n : move tab to position n (0=leftmost position)
guu : lowercase line
gUU : uppercase line
Where grep came from (RE being Regular Expression):
:g/RE/p
Delete lines 10 to 20 inclusive:
:10,20d
or with marks a and b:
:'a,'bd
Delete lines that contain pattern:
:g/pattern/d
Delete all empty lines:
:g/^$/d
Delete lines in range that contain pattern:
:20,30/pattern/d
or with marks a and b:
:'a,'b/pattern/d
Substitute all lines for first occurance of pattern:
:%s/pattern/new/
:1,$s/pattern/new/
Substitute all lines for pattern globally (more than once on the line):
:%s/pattern/new/g
:1,$s/pattern/new/g
Find all lines containing pattern and then append -new to the end of each line:
:%s/\(.*pattern.*\)/\1-new/g
Substitute range:
:20,30s/pattern/new/g
with marks a and b:
:'a,'bs/pattern/new/g
Swap two patterns on a line:
:s/\(pattern1\)\(pattern2\)/\2\1/
Capitalize the first lowercase character on a line:
:s/\([a-z]\)/\u\1/
more concisely:
:s/[a-z]/\u&/
Capitalize all lowercase characters on a line:
:s/\([a-z]\)/\u\1/g
more concisely:
:s/[a-z]/\u&/g
Capitalize all characters on a line:
:s/\(.*\)/\U\1\E/
Capitalize the first character of all words on a line:
:s/\<[a-z]/\u&/g
Uncapitalize the first character of all words on a line:
:s/\<[A-Z]/\l&/g
Change case of character under cursor:
~
Change case of all characters on line:
g~~
Change case of remaining word from cursor:
g~w
Increment the number under the cursor:
<Ctrl-A>
Decrement the number under the cursor:
<Ctrl-X>
redraw:
<Ctrl-L>
Turn on line numbering:
:set nu
Turn it off:
:set nonu
Number lines (filter the file through a unix command and replace with output):
:%!cat -n
Sort lines:
:%!sort
Sort on column #69:
:sort /.*\%69v/
Sort and uniq:
:%!sort -u
Read output of command into buffer:
:r !ls -l
Refresh file from version on disk:
:e!
Open a new window:
<Ctrl-W>n
Open a new window with the same file (split):
<Ctrl-W>s
Split window vertically:
<Ctrl-W>v
Close current window:
<Ctrl-W>c
:q
Make current window the only window:
<Ctrl-W>o
Cycle to next window:
<Ctrl-W>w
Move to window below current window:
<Ctrl-W>j
Move to window above current window:
<Ctrl-W>k
Move to window left of current window:
<Ctrl-W>h
Move to window right of current window:
<Ctrl-W>l
Set textwidth for automatic line-wrapping as you type:
:set textwidth=80
Turn on syntax highlighting
:syn on
Turn it off:
:syn off
Force the filetype for syntax highlighting:
:set filetype=python
:set filetype=c
:set filetype=php
Use lighter coloring scheme for a dark background:
:set background=dark
Htmlize a file using the current syntax highlighting:
:so $VIMRUNTIME/syntax/2html.vim
Or, htmlize from a command prompt:
in 2html.sh put:
#!/bin/sh
vim -n -c ':so $VIMRUNTIME/syntax/2html.vim' -c ':wqa' $1 > /dev/null 2> /dev/null
Now just run: shell> 2html.sh foo.py
Comments
Post a Comment