Skip to main content

Advanced VIM editor commands

:%s/pattern//gn
:%s/pattern//n
:10,50s/pattern//gn


0 or ^, $ or A(with insert of end of line)
cc changing line, cw changing word
dw word, dd line, 5dd
yy or Y, p


yw Copy word. Actually, it copies from the current cursor position till the end of the current word plus the white space after it.
yy Copy current line.
y$ Copy from current cursor position till the end of the line.
yG Copy from current cursor position till the end of the file.


:set hlsearch

CTRL-O : Retrace your movements in file in backwards.
CTRL-I : Retrace your movements in file in forwards.


h   move one character left
j   move one row down
k   move one row up
l   move one character right
w   move to beginning of next word
b   move to previous beginning of word
e   move to end of word
W   move to beginning of next word after a whitespace
B   move to beginning of previous word before a whitespace
E   move to end of word before a whitespace

All the above movements can be preceded by a count; e.g. 4j moves down 4 lines.

0   move to beginning of line
$   move to end of line
_   move to first non-blank character of the line
g_  move to last non-blank character of the line

gg  move to first line
G   move to last line

ngg move to n'th line of file (n is a number; 12gg moves to line 12)
nG  move to n'th line of file (n is a number; 12G moves to line 12)

H   move to top of screen
M   move to middle of screen
L   move to bottom of screen

zz  scroll the line with the cursor to the center of the screen
zt  scroll the line with the cursor to the top
zb  scroll the line with the cursor to the bottom

Ctrl-D  move half-page down
Ctrl-U  move half-page up
Ctrl-B  page up
Ctrl-F  page down
Ctrl-O  jump to last (older) cursor position
Ctrl-I  jump to next cursor position (after Ctrl-O)
Ctrl-Y  move view pane up
Ctrl-E  move view pane down
r{char}     replace the character under the cursor with {char}.
R     Enter Insert mode, replacing characters rather than inserting
zz

:colo desert, zellner, pablo, delek, slate,  torte, morning, evening, default


:tabedit file2
:tabnew file3
:tabs   You can list all the open tabs using :
$ vim -p source.c source.h      To open multiple files in tabs:

:split filename  - split window horizontally and load filename
:vsplit file     - vertical split and open file
:sview file      - same as split, but readonly
:close           - close current window


  
:1,10fo  10 lines folding
:za, zf
:zo  open folding


:Sexplore Open the explorer in a horizontal
:Vexplore ) Open the explorer in a vertical
:Texplore Open the explorer in another tabpage using and exit using :q
:Ex to open the file explorer

f + space (jump next space), f + p (jump next p char)
d + f + space (delete till next space)



_vimrc file
source $VIMRUNTIME/vimrc_example.vim
set guifont=Courier_New:h12:cANSI:qDRAFT
set nu
set hlsearch
colo desert
set diffexpr=MyDiff()
function MyDiff()
  let opt = '-a --binary '
  if &diffopt =~ 'icase' | let opt = opt . '-i ' | endif
  if &diffopt =~ 'iwhite' | let opt = opt . '-b ' | endif
  let arg1 = v:fname_in
  if arg1 =~ ' ' | let arg1 = '"' . arg1 . '"' | endif
  let arg1 = substitute(arg1, '!', '\!', 'g')
  let arg2 = v:fname_new
  if arg2 =~ ' ' | let arg2 = '"' . arg2 . '"' | endif
  let arg2 = substitute(arg2, '!', '\!', 'g')
  let arg3 = v:fname_out
  if arg3 =~ ' ' | let arg3 = '"' . arg3 . '"' | endif
  let arg3 = substitute(arg3, '!', '\!', 'g')
  if $VIMRUNTIME =~ ' '
    if &sh =~ '\<cmd'
      if empty(&shellxquote)
        let l:shxq_sav = ''
        set shellxquote&
      endif
      let cmd = '"' . $VIMRUNTIME . '\diff"'
    else
      let cmd = substitute($VIMRUNTIME, ' ', '" ', '') . '\diff"'
    endif
  else
    let cmd = $VIMRUNTIME . '\diff'
  endif
  let cmd = substitute(cmd, '!', '\!', 'g')
  silent execute '!' . cmd . ' ' . opt . arg1 . ' ' . arg2 . ' > ' . arg3
  if exists('l:shxq_sav')
    let &shellxquote=l:shxq_sav
  endif
endfunction
function DoPrettyXML()
  " save the filetype so we can restore it later
  let l:origft = &ft
  set ft=
  " delete the xml header if it exists. This will
  " permit us to surround the document with fake tags
  " without creating invalid xml.
  1s/<?xml .*?>//e
  " insert fake tags around the entire document.
  " This will permit us to pretty-format excerpts of
  " XML that may contain multiple top-level elements.
  0put ='<PrettyXML>'
  $put ='</PrettyXML>'
  silent %!xmllint --format -
  " xmllint will insert an <?xml?> header. it's easy enough to delete
  " if you don't want it.
  " delete the fake tags
  2d
  $d
  " restore the 'normal' indentation, which is one extra level
  " too deep due to the extra tags we wrapped around the document.
  silent %<
  " back to home
  1
  " restore the filetype
  exe "set ft=" . l:origft
endfunction
command! PrettyXML call DoPrettyXML()

asd

Comments

Popular posts from this blog

Offline AI Coding in VSCode: Continue + Ollama Complete Setup Guide

Want GitHub Copilot-level code assistance — but fully offline, air-gapped, and private? This guide walks you through setting up Continue (a VSCode extension) with Ollama (a local model runner) so you get chat, autocomplete, and inline editing powered entirely by models running on your own machine. No internet required at runtime. Table of Contents What Are Continue and Ollama? Prerequisites & Hardware Requirements Choosing the Right Models Step 1 — Installing Ollama & Pulling Models Step 2 — Installing Continue in VSCode (Offline) Step 3 — Configuring config.yaml Step 4 — Disabling Telemetry Step 5 — Usage & Shortcuts Troubleshooting What Are Continue and Ollama? Continue is an open-source VSCode (and JetBrains) extension that adds AI-powered coding features directly into your editor — think chat, inline edits, and tab autocomplete. By default it can connect to Claude, GPT-4, or any API. But it also supports local providers , which is exactly what we want here. Ollama i...

Local LLM on Ubuntu (CPU-Only): Ollama + Qwen Coder + Open WebUI + RAG Setup

Local LLM on Ubuntu (CPU-Only): Ollama + Qwen Coder + Open WebUI + RAG Run a private, high-performance internal AI coding assistant on your own hardware—no GPU required. Feb 13, 2026 Qwen 2.5 Coder RAG Enabled Enterprise Ready Keeping your code and documents on your own infrastructure is the gold standard for enterprise security. By combining Ollama , Qwen Coder , and Open WebUI , we can build a production-grade AI assistant that respects your privacy. Environment: CPU-only Ubuntu server (e.g., i9/Threadripper) with 64GB+ RAM for smooth 14B model inference. 1. System Preparation First, update your local environment and install necessary dependencies: sudo apt update && sudo apt upgrade -y sudo apt install -y curl git ca-certificates lscpu 2. Ollama & Model Tuning Install Ollama and optimize the configuration for CPU-only inference by setting the thread count: ...

Defining tomcat and mysql server Amazon EC2 instance

-- Create new amazon ec2 instance http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/EC2_GetStarted.html -- Give permisson to pem file chmod 400 mycertificate.pem -- Connect to EC2 instance ssh -i mycertificate.pem ubuntu@ec2-51-51-51-51.eu-west-1.compute.amazonaws.com -- Installation Oracle Java 1.8 $ wget --no-check-certificate --no-cookies --header "Cookie: oraclelicense=accept-securebackup-cookie" http://download.oracle.com/otn-pub/java/jdk/8u92-b14/jdk-8u92-linux-x64.tar.gz $ tar -xzvf jdk-8u92-linux-x64.tar.gz $ sudo mkdir -p /usr/java/ $ sudo mv jdk1.8.0_92/ /usr/java/ $ sudo vim  /etc/profile         JAVA_HOME=/usr/java/jdk1.8.0_92         PATH=$PATH:$HOME/bin:$JAVA_HOME/bin         JRE_HOME=/usr/java/jdk1.8.0_92/jre         PATH=$PATH:$HOME/bin:$JRE_HOME/bin         export JAVA_HOME...